Zoloto Waterline Valves

Product Details:

Screwed Female ends to IS 554 / BS 21 / ISO 7. Easy To Install.No Diaphragm, Piston Type Provided With High Quality Nitrile Rubber ‘O’ Ring. With a provision of installation of a Pressure gauge is provided.Size Range From : ½” (15mm) to 4” (100mm)

Product Details:

Wafer type design, thus taking lesser space then the conventional check valve. Being light in weight, is more rigid than the standard swing type check valve which Otherwise needs expensive foundation & special support.Being cylindrical in body, stresses are uniformly distributed. Can be installed in Vertical or Horizontal pipe lines.Low wear and tear of seat surface.Much longer seat life because of Bronze / S.S to rubber Contact .End connections are designed to suit flanges drilled to ANSI B Class-125/Class/150
Size Range From : 1/2” (15mm) to 16” (400mm)

Product Details:

Design Standard BS 7350. Double regulation with precision.Tamper proof setting. Hand wheel operated.Low noise flow.Can be made available with or without drain cocks.Nitrile / EPDM Rubber sealing for a shot shut off.Size Range From : 2½” (65mm) to 12” (300mm)

Product Details:

Specifications:

• Conforms to BS 7350 : 1990
• Precise double regulating
• Tamperproof setting with a lock shield
• PTFE Sealing disc to ensure a proper shutoff
• Provided with Inlet / Outlet Pressure Test Cock
• Facilitates system design hence saving of energy
• Handwheel Operated, Easy to install set
• Accentuates systematic commissioning of the plant for an optimal operation

Product Details:

Specifications:

• Screwed female ends to IS: 554/BS: 21/ISO: 7
• Single piece design. Integral Seat
• Meant for vertical lines only
• Permits flow in one direction and closes automatically if the flow reverses. Also available with ' 0 ' Ring seating
• Beauty in visual appearance

 

Product Details:

Features:

• Screwed ends to BSP Female inlet & 5/8” BSP Male Outlet.

• Two Piece Design.
• Quarter turn, lever Operated for convenient maneuvering. Stainless Steel (AISI 304) roof proof perforated sheet screen provided in the strainer.Stainless Steel, Rust free & Robust lever
• Most suitable for refrigeration & H.V.A.C. Application This Item can also be provided without Strainer

• Size Range From : 1/2” (15mm) to 1” (25mm)

Product Details:

Specifications:

• Screwed female ends to BSP/Flanged ends to BS:10 Table “D”
• Full Bore Design
• Quarter turn, lever operated
• Provided with S.S/Brass Ball & SS (AISI 410) Brass
• (IS:6912 FLB) Spindle
• Glass filled Teflon body rings & gland packing
• Compelling visual appearance

Product Details:

Details:

• Design Standard IS 5312 - 1 1984. Flanged Ends to IS 1538 .

• Swing type seating.
• Bolted cover.

• Renewable seat with Rubber Flap.

Product Details:

Supported by a rich vendor-base, we are able to offer our clients a broad array of Zoloto Bronze Gate Valve Screwed Flanged. Our vendors use optimum grade raw material and sophisticated technology in the manufacturing process. We make sure these products are in line with the set industry standards; hence, check the range on varied parameters before shipment. These products have the ability to transmit the light but cannot be looked through from outside.

Specifications:

• Screwed Female ends to BSPT/Flanged ends to IS:778
• Manufactured under Licence No. CM/L-0624644 from BIS
• Screwed in bonnet, Non-rising spindle, Solid wedge
• Sheet metal wheel operated
• High quality Teflon (PTFE) packing
• Strictly conforming to IS:778 Class-I
• Distinct edge over all other makes available in the market
• Available with open-shut indicator and locking device also